Dongshang produces Inconel 625 cold worked seamless tube pipe according to ASTM B444/ASME SB444 standard, alloy 625 Seamless Pipe can be supplied in 2 conditions (grade 1 and Grade 2). ASTM B444 UNS N06625 Grade 1 tube is in an annealed condition, Grade 2 tube is in a solution annealed condition. UNS N06625 Alloy 625 tube sizes are large range in outside diameter and nominal or minimum wall, pipe sizes are standard pipe sizes and schedule.
ASTM B444/ASME SB444 UNS N06625 Alloy 625 Tube Pipe has excellent properties to resist corrosion and high strength, 625 nickel alloy grade a unique nickel-based alloy that provides high strength and toughness alongside excellent corrosion and oxidation resistance. It is non-magnetic, exhibits high fatigue strength, and will maintain its performance and mechanical properties across an extensive temperature range (from cryogenic to 2,000°F/1,093°C), Inconel 625 consists of a minimum of 58% Nickel and 8% Molybdenum content.
UNS N06625, Alloy 625, EN WNr 2.4856
ASTM B444/ASME SB444 UNS N06625 Alloy 625 Tube And Pipe Description
| Standard | ASTM B444, ASME SB444 |
|---|---|
| Tube Type | Solution Annealed and Pickling, Bright Annealing |
| Alloy | UNS N06625, Alloy 625 |
| Finishes | Slolution Annealed and Pickling, Bright Annealing |
| Outside Diameter | 0.188″ – 1.500″ |
| Thickness | 0.028″ – 0.083″ |
ASTM B444 ASME SB444 N06625 Inconel 625 Chemical Composition
| Alloy | % | Ni | Cr | Mo | Nb+Ta | Fe | Al | Ti | C | Mn | Si | Cu | P | S | Co |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N06625 | Min. | 58.0 | 20.0 | 8.0 | 3.15 | ||||||||||
| – | Max. | 23.0 | 10.0 | 4.15 | 5.0 | 0.40 | 0.40 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 1.0 |
ASTM B444 ASME SB444 N06625 Inconel 625 Tensile Properties
| Alloy | Tensile strength | Yield strength | Elongation in 50.8mm | Brinell hardness |
|---|---|---|---|---|
| Min ksi (Mpa) | Min ksi (Mpa) | Min, % | HB | |
| N06625 Annealed | 120 (827) | 60 (414) | 30 | ≤220 |
| N06625 Solution Annealed | 100 (690) | 40 ( 276) | 30 | ≤220 |
Nickel Alloy UNS N06625 is a nonmagnetic nickel-based Alloy that is highly resistant to corrosive environments and specifically resistant to pitting corrosion, crevice corrosion and corrosion cracking. The mechanical properties of the Alloy ensure excellent performance under the most severe conditions both at extremely low cryogenic temperatures and temperatures of up to 1100°C. Alloy 625 provides superior corrosion resistance in aggressive environments coupled with excellent strength and weldability.
ASTM B444/ASME SB444 UNS N06625 Alloy 625 Tube Pipe Tolerances
| Outside Diameter, mm | OD Tolerance, mm | ID Tolerance, mm | Wall thickness Tolerance, % |
|---|---|---|---|
| OD＜2.4 | +0.05/-0 | +0/-0.05 | ±10 |
| 2.4≤OD＜4.8 | +0.08/-0 | +0/-0.08 | ±10 |
| 4.8≤OD＜12.7 | +0.10/-0 | +0/-0.10 | ±10 |
| 12.7＜OD≤31.8 | +0.13/-0 | +0/-0.13 | ±10 |
Applications
Alloy 625 is a versatile alloy used in many different applications, including the chemical process industry, aerospace, food processing, electronics, and nuclear power generation. Alloy 625 is used extensively to clad wetted surfaces of oil and gas equipment to protect against corrosion by H2S, CO2 , chlorides, and other aggressive media. Its elevated temperature oxidation resistance makes it a good choice for heat-treating fixtures, furnaces, incinerators, and other high-temperature equipment. Dongshang offers specialty alloy 625 seamless pipe & tube for use in multiple industries and applications, including:
- Chemical Processing
- Oil & Gas
- Electronics
- Nuclear Power Generation
- Food Processing
- Aerospace
- High-temperature Environments
- Heat-treating Fixtures
- Furnaces
- Incinerators
ASTM B444
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube
This specification covers UNS N06625 and UNS N06852 nickel-chromium-molybdenum-columbium alloys and UNS N06219 nickel-chromium-molybdenum-silicon alloy in the form of cold-worked seamless pipe and tube. UNS N06625 products are furnished in annealed Grade 1 and solution annealed Grade 2 while UNS N06219 and UNS N06852 are in solution annealed condition only. Chemical testing shall be performed on each type of material and shall conform to the chemical composition limits specified for carbon, manganese, silicon, phosphorus, sulfur, chromium, tantalum, columbium, cobalt, molybdenum, iron, aluminum, titanium, copper, and nickel. The material shall undergo tensile testing and shall conform to the required room temperature tensile properties like tensile strength, yield strength, and elongation depending on the heat treatment used and including small diameter and light-walled tubing. Each pipe or tube shall undergo hydrostatic testing and shall conform to the allowable fiber stress and also be examined with a nondestructive electric test as prescribed.
This specification covers nickel-chromium-molybdenum-columbium alloys (UNS N06625 and UNS N06852) and nickel-chromium-molybdenum-silicon alloy (UNS N06219)3 in the form of cold-worked seamless pipe and tube. The general requirements for pipe and tube are covered by Specification B829.
UNS N06625 products are furnished in two grades of different heat-treated conditions:
- Grade 1 (annealed)—Material is normally employed in service temperatures up to 1100°F (593°C).
- Grade 2 (solution annealed)—Material is normally employed in service temperatures above 1100°F (593°C) when resistance to creep and rupture is required.